D4 Crimp Style Connector features a nickel plated brass body for enhanced durability, and comes with a choice of boots in a variety of colors.
More
SMA 906 has a stepped ferrule design, although it looks like SMA 905 connector. When two SMA 906 connector are mated together, the stepped ferrule design allows a full length alignment sleeve to be used, so the connection of SMA 906 connector has a lower insertion loss than of SMA 905. When installing SMA 906 connector into SMA 905,a half length al...
More
Today’s patch fields with high packing densities do not only require a compact design of single components, but also a stable optical transmission performance.The LX.5 connector, based on the 1.25 mm ferrule technology, is the only standardized SFF connector filling the gap between high packing density and safety due to its metal shutter.
More
The LC connector was the first combination small form factor connector on the market. The use of a high performance 1.25 mm ferule gives the connector extremely high performance characteristics. The Optronics LC optical fiber connector crimp barrel assembly plus a crimp over sleeve and rubber boot. These connectors are suitable for 900μm and 2 m...
More
GH LC-HD connector is a totally unique design which can further increase panel density over currently availablesolutions and allow for the highest density possible. A gentle pull on the tab will disengage it from anextremely dense fiber optical panel. The pull tab is a perfect location to affix a connector label to help in thequick identification o...
More
The LC Duplex Switchable Uniboot Connector is a unique design that allows the use of round style, 2mm or 3mm jacketed cable Instead of the traditional zipcord duplex cable for a more compact design. The housing of the LC Duplex Switchable Connector can be taken apart In the field without the use of any special tooling. The LC Duplex Switchable Unib...
More
The MPO provides the perfect solution to the ever-present problem of protecting the terminated fibres. The small size of the MPO allows pre-terminated fibre cable to be fed through the smallest holes, making the installation benefits of pre-terminated fibre even greater The MPO connectors are a very high-density small form factor connector, designe...
More
GH’s SM and MM Attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, E/O converters and for testing the linearity or dynamic range of optical power meters. GH’s Attenuators can also be used in optical amplifier systems to balance the gain across the different operating...
More
GH’s SM and MM Attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, E/O converters and for testing the linearity or dynamic range of optical power meters. GH’s Attenuators can also be used in optical amplifier systems to balance the gain across the different operating...
More
GH’s SM and MM Attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, E/O converters and for testing the linearity or dynamic range of optical power meters. GH’s Attenuators can also be used in optical amplifier systems to balance the gain across the different operating...
More
86-21-67641323
sales@hy-fiber.com
hy-fiber
86-18621633929