This device is the point-to-point optical transmission device developed on the basis of VLSI. The device provides 1-16*E1 interface, 1-4*10/100/1000M Ethernet interface (Wire Speed 1000M) and 2 expansion interfaces. 4* Ethernet interface is switch interface, can support VLAN. 1 expansion interface can be used as the transmission channel of RS232/R...
More
The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA and SFF-8472.
More
The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA and SFF-8472.
More
The HD-SB3512-3SCD and HD-SB5312-3SCD series SFPs are small form factor pluggable (SFP) transceivers compatible with multi-sourcing agreement (MSA). It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
More
The HD-SB3512-3SCD and HD-SB5312-3SCD series SFPs are small form factor pluggable (SFP) transceivers compatible with multi-sourcing agreement (MSA). It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
More
This device is the point-to-point optical transmission device developed on the basis of VLSI. The device provides 1-16*E1 interface, 1-4*10/100/1000M Ethernet interface (Wire Speed 1000M) and 2 expansion interfaces. 4* Ethernet interface is switch interface, can support VLAN. 1 expansion interface can be used as the transmission channel of RS232/R...
More
This series of equipment is the E1 switch developed on the basis of the special VLSI developed by our company. Provide 1-8 independent E1 switching protection functions (8 + 16e1). Under the default working mode, when the main E1 line fails, the equipment will automatically switch to the standby E1 line for transmission without damage; After the...
More
16xE1 Impedance Converter Provide 16 channel G.703 75(BNC) to 120Ω(RJ45) Converter ,not need power;
More
This device is the point-to-point optical transmission device developed on the basis of VLSI. The device provides 1-16*E1 interface, 1-4*10/100/1000M Ethernet interface (Wire Speed 1000M) and 2 expansion interfaces. 4* Ethernet interface is switch interface, can support VLAN. 1 expansion interface can be used as the transmission channel of RS232/R...
More
The Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system wo...
More
86-21-67641323
sales@hy-fiber.com
hy-fiber
86-18621633929